model. no. rev. ningbo foryard optoelectronics co.,ltd add: no.115 qixin road ningbo zhejiang china zip: 315051 tel: 0086-574-87933652 87927870 87922206 fax: 0086-574-87927917 e-mail: sales@foryard.com ( general) http://www.foryard.com page 1/8 emitting color:red/green smt package lens type: water clear. http://www.foryard.com pb-free reflow soldering application rohs compliant approved by FYLS-0603AURUGC a features: indicators product specification model no. FYLS-0603AURUGC customer approved signatures top led type size (mm):1.6*0.8*0.3 checked by applications: light strips lcd backlight decorative lighting prepared by interior automotive illuminations mobile phones
model. no. rev. mechanical dimensions notes: 1. dimension in millimeter [inch], tolerance is 0. 25 [.010]. 2.the specifications,characteristics and technical data described in the datasheet are subject to chan ge without prior notice. page 2/8 FYLS-0603AURUGC a model no. FYLS-0603AURUGC http://www.foryard.com
model. no. rev. min. tpy. r 2.00 g 2.10 r 645 g 575 r 631 g 574 r 80 g 45 --- 130 --- r g page 3/8 // peak emission wavelength 50% power angle material deg vr = 5v u a v nm nm mcd luminous intensity dominant wavelength reverse current ir 2.70 if = 20ma if = 20ma if = 20ma if = 20ma r 30 100 78 forward voltage vf http://www.foryard.com storage temperature typical electrical &optical charcteristics(ta=25oc ) tstg model no. FYLS-0603AURUGC forward current(dc) pd ma ma mw g FYLS-0603AURUGC absolute maximum rating a ifp peak forward current* power dissipation operation temperature topr items reverse voltage absolute maximun ratings(ta=25 o oo o c) 30 100 78 soldering temperature vr symbol items max. tsol 5 v *pulse width Q Q Q Q 1msec duty Q Q Q Q 1/10 chip condition if -30 o c +80 o c -40oc +100oc p d iv 2? item reflector wire encapsulate gold silicone algainp note: 2.pay attention about static for ingan 1.luminous intensity is based on the for yard standards. symbol unit unit 10 reflow soldering:250 /5sec if = 20ma material gold silicone algainp 2.60 material
model. no. rev. typical eletrical/optical characteristics curves(t a=25 o oo o c unless otherwise noted) page 4/8 http://www.foryard.com FYLS-0603AURUGC a model no. FYLS-0603AURUGC algainp/gap relative lumionous intensity(lop @max=1)
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 5/8 http://www.foryard.com FYLS-0603AURUGC model no. FYLS-0603AURUGC a
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 6/8 FYLS-0603AURUGC a model no. FYLS-0603AURUGC http://www.foryard.com foryard o p t o e l e c t r o n i c s led led led led pn:fyls-xxxxx-xx qty:xxxxx pcs date:xxxx/xx/xx gw: xx kg nw: xx kg xxxxxxxxxx rohs rohs rohs rohs attention attention attention attention 0603a 4000/reel 9 reels /box 6 boxes/carton qc: qc pass reel 1 1 . 5 30 18 . 5 foryard o p t o e l e c t r o n i c s www.foryard.com 39.0 3 8 . 0 3 2 . 0 outside label outside label
model. no. rev. precautions for use: page 7/8 to prevent moisture absorption into smd leds during the transportation and storage , the leds are pac ked smd leds must be used within 24 hours. if the leds are not within 24 hours after removal from the bag , after the bag is opened, the smd leds must be store d at <30 and < 60% rh. under these conditions, in a moisture-barrier bag. desiccants and a humidit y indicator are packed together with the leds as the shelf life of leds stored in the original seale d bag at <40 and < 90% rh is 12 months. baking is a FYLS-0603AURUGC frequently during the baking process. 2. soldering (1) manual soldering with a soldering iron secondary protection before opening the packaging , check for air leaks in the bag. baking is required take the material out of the pac kaging bag before baking. do not open the oven door use a soldering iron of less than 25 watts is recom mended . the iron temperature must be kept below 3 15 handling of an smd led should be done only when the package has been cooled down to below 40 the epoxy resin of an smd led should not contact th e tip of the soldering iron. no mechanical stress should be exerted on the resin portion of an smd led during soldering. model no. FYLS-0603AURUGC 1. storage (2)reflow soldering temperature profile and soldering time no more than 2 seconds. required if the shelf life has expired http://www.foryard.com peak temperature temperature pre-heat soak reflow cooling time melting-point
model. no. rev. page 8/8 smd led should not be modified after solde ring. if modification cannot be avoided, the modifi cation static electricity and surge voltage damage the led s. so it is recommended that an esd wrist band, solder= pb-free duration above 183 is 80 sec. max time within 5 of actual peak temperature=10 sec. max peak preheat temperature:100-150 ramp-down rate:6 /sec.max peak temperature:250 a http://www.foryard.com model no. FYLS-0603AURUGC solder=sn63-pb37 average ramp-up rate:4 /sec.max peak preheat temperature:100-150 preheat time:100seconds.max ramp-down rate:6 /sec.max peak temperature:230 time within 5 of actual peak temperature=10 sec. max preheat time:100seconds.max must be pre-qualified to avoid damage to t he smd leds. reflow soldering should not be done more t han one time duration above 217 is 80 sec. max average ramp-up rate:4 /sec.max high-brightness led light may injure human eyes. av oid looking directly into lighted led no stress should be exerted on the package during soldering. (3) recommend soldering pad design(unit=mm) FYLS-0603AURUGC 4. others is changed slightly an operating current and therm al. this device should not be used in any type of fluid such as water, oil, organic solvent and etc reverse voltage should not exceed the absolute maxi mum rating on the data sheet. the colour of the le ds the influence of ultrasonic cleaning on the leds de pends on factors such as ultrasonic power and the w ay. the appearance and specifications of the product ma y be modified for improvement without notice. 3. static electricity esd shoe strap or an anti-electrostatic glove be us ed when handling the leds. when washing is required, ipa (isopropyl alcohol) s hould be used. all devices, equipment and machinery must be proper ly grounded
|
